Electrical scheme generation

The command Create electrical scheme opens the Electrical scheme window, which allows you to define some characteristics of the scheme.

Electrical scheme window

Arrangement

Allows you to set how the electrical scheme should be drawn between four predefined arrangements.

Paper format

Allows you to define the format of the paper on which the electrical scheme will be printed.

When printing, you must set the printer paper to the same size you set here.

Optimize

If there is a check mark, the schema is drawn even in areas under the legend and to the left of the title block.

There is no check to see if the scheme overlaps the legend or title block, so when that happens, disable the option.

Character height

Used to define the height you want for the character of the text on the printed sheet. The height is calculated in such a way as to be correct in the paper size that has been set.

Default

Resets the character height to its default value.

Groups of modules

A group of modules is formed by the modules components a string. Depending on the structure of the system and the number of modules of the strings, and in order to have the best readability of the diagram, you can choose between two options:

Show all modules

Displays all the modules.

Show a maximum N modules

Displays all the modules if their number is less than or equal to the number set N, otherwise displays N modules.

Groups of strings

A group of strings is formed by the strings connected to a single electrical panel or to a single inverter.

As for the modules, you can choose between two options:

Display all strings

Displays all the strings.

Display a maximum N strings

Displays all the strings if their number is less than or equal to the number N set, otherwise displays N strings.

Insert button

The drawing if present is erased and is generated the electrical scheme according to the current system composition.

 If there are primitive created by the user will be asked whether should be kept or deleted. A primitive scheme changed by the user is considered a primitive user.

Cancel button

Closes the window canceling the command. The drawing is not changed.

Electrical scheme window settings are saved with the project, so each time you give the command Create electrical scheme are proposed settings previously used for that project. If the command is given for the first time for that project are proposed settings used for the last scheme generated by the program.

 

The various components of the electric diagram are inserted on different layers, in order to make easier the change of dwg if the drawing is exported. The layers are: Draft, Texts, Legend and Frame. These levels are not visible in the Layers dialog and then can not be changed by the user.