Electrical panel DC and AC

Sets the criteria that the wizard should be used in the insertion of panels DC and AC in the composition of the scheme of system.

These criteria are used exclusively by the wizard, in the process of modeling manual these settings are not binding.

Panels AC: You can specify the presence of the main electrical panel and an isolation transformer. The wizard can enter a single panel AC in the system (the main panel), the possibility to introduce other panels AC is delegated to the manual modeling.

Panels DC: You choose the criterion of insertion of panels DC on input to the inverter:

• Inserting a electrical DC panel on each inverter input, the strings are divided among all panels.

• Inserting a single electrical DC panel on inverter input.

• Inserting of electrical DC panels only if the inverter inputs are insufficient.

• Limitation on the number of inputs for each electrical DC panel.

The possibility of limiting the maximum number of inputs on panels DC allows the wizard to split the inputs on several panels within the limit imposed.

Furthermore, both for AC panels that for those DC is possible to choose a protection scheme to be used in the composition and optionally in the dimensioning of the electrical components of electrical panels of the system.